DeSLUDGE* Super Powerful Flushing Oil Concentrate


No risk - 200% money back product performance guarantee

 

IMG 1169 2

 
  •   Removes abrasive oil sludge from inside engines.

  •   Frees sticking piston rings

  •   Removes cylinder glaze

  •   Reduces “blowby”

  •   Reduces engine overheating .. see below

  •   Reduces engine exhaust smoke

  •   Improves engine starting

  •   Improves idling

  •   Improves engine POWER


Ideal for all diesel engines

Available in 1 litre and 250ml easy to use "squeeze-measure-pour" packs .. 250ml treats 20-100L of engine oil.  Please see "Directions for use" below.
 

DeSLUDGE flushing oil concentrate is for use in mineral and synthetic engine oils.

Do NOT use in brake or hydraulic fluids.


Buy DeSLUDGE  250ml

We are able to Courier to your door in USA, UK and many other countries, up to 2 x 250ml packs of this product for a freight charge of only NZD33.00
 

Buy DeSLUDGE  1 litre

 
Please talk to, or email us about our "coupon" multi-pack and volume discounts .. contact
 

 

A cleaner engine "bottom-end" in every bottle..

 
  DeSLUDGE_Nissan_2.7D_sm1.jpg
Click image above, to enlarge the all too common problem of fresh oil being immediately contaminated with soot/sludge residing in oil galleries (BLACK top spot) .. compared with soot/sludge removed with DeSLUDGE (almost clear lower spot)
 


DeSLUDGE .. DIRECTIONS for USE:

DIRTY ENGINES:
Bring engine to FULL operating temperature .. hot oil.
Replace this existing hot oil, then add 12.5ml DeSLUDGE per litre of replacement oil.
Run hot engine with replacement oil containing DeSLUDGE at fast idle for 30 minutes.
Drain hot replacement oil containing DeSLUDGE and sludges.
Replace oil filter and refill engine with clean oil.

Finally, add SupaSLIP anti-friction/anti-wear oil additive for extra protection and longevity.

ROUTINE MAINTENANCE:
Add 2.5ml DeSLUDGE per litre of hot engine oil.
Drive normally for ½ to 1 hour before next oil change, keeping engine at full operating temperature .. hot oil.
Drain hot oil containing DeSLUDGE and sludges.
Replace oil filter and refill engine with clean oil.

Finally, add SupaSLIP anti-friction/anti-wear oil additive for extra protection and longevity.

CAUTION  because DeSLUDGE is so efficient at releasing sludges from internal engine components, it is quite common to release 2-3 litres of extra volume at an oil change when DeSLUDGE is first used in dirty diesel engines .. ensure your used oil catch container is large enough!!

 



Chronic Overheating?

Does your engine overheat, despite thoroughly checking out the cooling system?

This is not unusual.  We have many customers who have spent hundreds of dollars on new water pumps, thermostats, heat exchangers, radiators, mechanical or chemical cleaning and still had engines that over heat under load. The problem may result from lack of oil supply.

Put simply, it gets back to basics. Many people do not realize that engine oil has 5 duties to perform, namely ..

1. Wear prevention

2. Corrosion protection

3. Cleaning

4. Providing a seal

5. Cooling.

An engine requires a certain amount of oil flow to provide important cooling to all lubricated parts, especially the underside of pistons, where the combustion flame has a major effect.

If engine services have been overlooked a bit, or over extended, or poor quality oils used, sludge will build up in critical areas and reduce oil flow. Some engines, especially small Japanese diesels, accumulate high oil soot levels.

A simple test you can easily do: Rub some oil on your fingers from the dipstick and then wipe it off. If the oil is capable of staining your fingers, there is no detergency left at all, so sludge settles out. The oil should never reach this state, even at the end of its service life.

If sludge is present, oil pick up strainers and galleries can become constricted, or completely blocked. This has a dramatic effect on oil flow and hence engine cooling. Engine oil sludge is a major cause of chronic overheating problems, but can be easily rectified by using our Flushing Oil Concentrate DeSLUDGE, which has superior chemicals for cleaning and removing sludge and piston ring groove carbon.

 
 

DeSLUDGE*  Testimonials ..

A cleaner engine "bottom-end" in every bottle.

Please talk to, or email us about our "coupon" multi-pack and volume discounts .. contact

No risk .. 200% MONEY BACK PRODUCT PERFORMANCE GUARANTEE .. You can rely on DeSLUDGE .. you get a 200% purchase price money back guarantee on product performance, when used as directed on the product label, in engines that are mechanically sound and correctly adjusted.  "Product performance" means to remove most of the sludge from the internal oil galleries and oil sump of a petrol or diesel engine.


* tradename. © Copyright of Rosmac Ltd.

Product display.
Page 1 of 1
Displaying: 1 - 2 of 2 items. Price. Add to cart.
DeSLUDGE* Super Powerful Flushing Oil Concentrate .. 250ml pack

DeSLUDGE* Super Powerful Flushing Oil Concentrate .. 250ml pack

DeSLUDGE gives excellent removal of sticky abrasive sludges and carbon deposits around lower piston rings and in oil galleries, oil feed capillaries and oil sumps. Easy to use "squeeze-measure-pour" 250ml pack treats 20-100L of engine oil.

NZ $109.75
excl GST
Qty.
DeSLUDGE* Super Powerful Flushing Oil Concentrate .. 1 litre pack

DeSLUDGE* Super Powerful Flushing Oil Concentrate .. 1 litre pack

DeSLUDGE gives excellent removal of sticky abrasive sludges and carbon deposits around lower piston rings and in oil galleries, oil feed capillaries and oil sumps. Easy to use "squeeze-measure-pour" 1 litre pack treats 80-400L of engine oil.

NZ $329.25
excl GST
Qty.
Product display.
Page 1 of 1